Catalytic Converter Direct fit series by BLUEFLOW. If your car needs replacement, install one that will get you through the smog check. This converter is part of the exhaust header/manifold assembly, and it will directly replace the factory unit, with little or no fabrication required. The Direct Fit Catalytic Converter with Header is available in Pre-OBD II and OBD II configurations.
Product Details
- Catalytic Converter Body Material: Stainless steel
- Air Tube Pre-Installed: YES
- Series: Standard
- Gasket Or Seal Included: Yes
- Heat Shield Material: Stainless Steel
- Substrate Material: Ceramic
- Federal Emissions compliant design.
Features
- Constructed to meet your vehicle’s specific emissions requirements
- Direct fit design
- Features the right loading of precious metals & proprietary washcoat technology
- Stainless steel body and pipe heat shields
- Easy installation without cutting or welding
- Covered by 5 years/50,000 miles emissions and structural warranty
Catalytic Converter Replacement Guide
1. Raise the vehicle and secure it on jack stands. Make sure to raise the vehicle enough to give space for maneuvering underneath the vehicle.
2.Identify the catalytic converter on the underside of the vehicle. Some vehicles will even have multiple catalytic converters, in those instances it is important to note which catalytic converter needs to be replaced.
3.Remove any oxygen sensors. If required, remove any oxygen sensors that may be mounted directly in or near the catalytic converter.
4.Spray penetrating oil on the exhaust flange hardware and flanges, and allow them a few minutes to soak, then remove the Old Catalytic Converter.
5.Replace the catalytic converter with a new one, and replace any exhaust flange gaskets to prevent exhaust leaks.
6.Install the new catalytic converter using the reverse of the removal procedure, steps 1-4. (Highly recommend professional operation)
OE Part Number: 20691-57E01, 54459-0M005, 20711-CA020
Fitment: 2003 2004 2005 2006 2007 Nissan Murano V6 3.5L GAS
|
Notes Important part details |
Year | Make | Model | Trim | Engine |
| rear | 2007 | Nissan | Murano | SE Sport Utility 4-Door | 3.5L 3498CC V6 GAS DOHC Naturally Aspirated |
| rear | 2007 | Nissan | Murano | SL Sport Utility 4-Door | 3.5L 3498CC V6 GAS DOHC Naturally Aspirated |
| rear | 2007 | Nissan | Murano | S Sport Utility 4-Door | 3.5L 3498CC V6 GAS DOHC Naturally Aspirated |
| rear | 2006 | Nissan | Murano | SE Sport Utility 4-Door | 3.5L 3498CC V6 GAS DOHC Naturally Aspirated |
| rear | 2006 | Nissan | Murano | SL Sport Utility 4-Door | 3.5L 3498CC V6 GAS DOHC Naturally Aspirated |
| rear | 2006 | Nissan | Murano | S Sport Utility 4-Door | 3.5L 3498CC V6 GAS DOHC Naturally Aspirated |
| rear | 2005 | Nissan | Murano | SE Sport Utility 4-Door | 3.5L 3498CC V6 GAS DOHC Naturally Aspirated |
| rear | 2005 | Nissan | Murano | SL Sport Utility 4-Door | 3.5L 3498CC V6 GAS DOHC Naturally Aspirated |
| rear | 2005 | Nissan | Murano | S Sport Utility 4-Door | 3.5L 3498CC V6 GAS DOHC Naturally Aspirated |
| rear | 2004 | Nissan | Murano | SE Sport Utility 4-Door | 3.5L 3498CC V6 GAS DOHC Naturally Aspirated |
| rear | 2004 | Nissan | Murano | SL Sport Utility 4-Door | 3.5L 3498CC V6 GAS DOHC Naturally Aspirated |
| rear | 2003 | Nissan | Murano | SE Sport Utility 4-Door | 3.5L 3498CC V6 GAS DOHC Naturally Aspirated |
| rear | 2003 | Nissan | Murano | SL Sport Utility 4-Door | 3.5L 3498CC V6 GAS DOHC Naturally Aspirated |
Warranty Info
BLUEFLOW specializes in superior catalytic converter and exhaust technology and has spent the past 20+ years earning its reputation as a market leader. BLUEFLOW Catalytic Converters combine efficient industrial design to produce a product that exceeds, rather than meets, the highest standards of product performance and efficiency in the industry. BLUEFLOW uses Ceramic substrates with different combinations of cell density and wall thickness to meet vehicle specific requirements.
BLUEFLOW warrants that all Performance Products are free from defects. Most of exhaust products are warranted against blowouts and defects in material and workmanship for as long as the original purchaser owns the vehicle on which it was originally installed. The warranty is void if the exhaust products are not installed properly on the vehicle for which it is designed.
This warranty does not apply to any exhaust product which has been installed on any commercial or racing vehicle or which has been improperly installed, altered, or subjected to misuse or damage from accidents. Also, cost of labor and any additional parts required to complete installation of a replacement product are not covered by this warranty.
The warranty certificate, along with proof of purchase, MUST be presented to the BLUEFLOW service, when making a claim for replacement. The original exhaust product must also be returned and exchanged for a new exhaust product of the same part number.
Reviews
Every Customer can leave a review about our service and the product that was purchased. In order to leave your review for your new product, please follow the link in the email you receive after completing your purchase. You can rate appearance, ease of installation, price/value and product quality.